OWNERS MANUAL FOR WEISS DAC202 D/A CONVERTER
Page
29
Date: 03/10
Technical Data
Digital Inputs:
(1) XLR connector, (1) RCA connector, (1) Toslink
connector (optical), (2) Firewire connectors.
All inputs accept professional or consumer standard , i.e.
accept AES/EBU or S/PDIF signals.
Sampling Frequencies: 44.1, 48.0, 88.2, 96.0, 176.4 or
192kHz on any of the inputs.
Maximum input wordlength: 24 Bits.
Dual wire mode: channel 1 on XLR, channel 2 on RCA,
active at 176.4 or 192 only.
Digital Outputs:
(1) XLR connector, (1) RCA connector, (2) Firewire
connectors.
Professional Channel Status Data on the XLR and RCA
outputs.
Dual wire mode: channel 1 on XLR, channel 2 on RCA,
active at 176.4 or 192 only.
Main Analog Outputs:
(2) XLR connectors (hot on pin 2), DC coupled, short
circuit proof output circuitry, output impedance 44 Ohm.
(2) RCA connectors, DC coupled, short circuit proof
output circuitry, Output impedance: 22 Ohm
Output level: Selectable via the LCD menu, 4 settings:
XLR output:
+20.44 dBu (8.15Vrms) with a 0dBFS sinewave input
+14.57 dBu (4.15Vrms) with a 0dBFS sinewave input
+7.74 dBu (2.12Vrms) with a 0dBFS sinewave input
+2.72 dBu (1.06Vrms) with a 0dBFS sinewave input
RCA output:
+14.44 dBu (4.075Vrms) with a 0dBFS sinewave input
+8.57 dBu (2.075Vrms) with a 0dBFS sinewave input
+1.74 dBu (1.06Vrms) with a 0dBFS sinewave input
-3.28 dBu (0.53Vrms) with a 0dBFS sinewave input
These levels are achieved with a 0.0dB setting for the
level control on the LCD screen.
Suggested subsequent amplifier input impedances:
8.15V setting: 500 Ohm or higher
4.15V setting: 300 Ohm or higher
2.12V setting: 150 Ohm or higher
1.06V setting: 70 Ohm or higher
0.53V setting: 40 Ohm or higher
Headphone Output:
(1) stereo ¼ inch Jack connector, DC coupled, short
circuit proof output circuitry.
Output level: Selectable via the LCD menu, 4 settings:
+16.53 dBu (5.2Vrms) with a 0dBFS sinewave input
+10.84 dBu (2.7Vrms) with a 0dBFS sinewave input
+1.3 dBu (0.9Vrms) with a 0dBFS sinewave input
-11.77 dBu (0.2Vrms) with a 0dBFS sinewave input
These levels are achieved with a 0.0dB setting for the
level control on the LCD screen.
Suggested headphone impedances:
5.2V setting:100 Ohm or higher
2.7V setting: 50 Ohm or higher
0.9V setting: 16 Ohm or higher
0.2V setting: 4 Ohm or higher
