Installation and operating instruction
Oil condensing boiler WTC-OB 18-B
2 Safety
83311002 1/2018-03 La
7-132
2 Safety
2.1 Designated application
The appliance is suitable for:
Warm water heating circuits in closed systems to EN 12828,
a flow rate of maximum 1500 l/h.
The combustion air must be free from aggressive compounds (e. g. Halogens). If
the combustion air in the boiler room is contaminated, increased cleaning and ser-
vicing will be required. In this case the appliance should be operated room air inde-
pendent.
The appliance should only be used in enclosed rooms.
The installation room must comply with local regulations.
Improper use could:
endanger the health and safety of the user or third parties,
cause damage to the appliance or other material assets.
2.2 What to do if flue gas can be smelled
Switch off appliance and turn of the system.
Open doors and windows.
Notify your heating contractor or Weishaupt Customer Service.
2.3 Safety measures
Safety relevant fault conditions must be eliminated immediately.
Components, which show increased wear and tear or whose design lifespan is or
will be exceeded prior to the next service should be replaced as a precaution
[ch. 9.2].
The design lifespan of the components is listed in the service plan.
2.3.1 Normal operation
All labels on the appliance must be kept in a legible condition.
Stipulated settings, service and inspection work should be carried out at regular
intervals.
Only operate the appliance with its cover closed.
Do not touch moving parts during operation.
2.3.2 Electrical connection
For work carried out on live components:
Observe the accident prevention instructions DGUV Regulation 3 and adhere to
local directives,
tools in accordance with EN 60900 should be used.
2.4 Disposal
Dispose of all materials and components in a safe and environmentally friendly way
at an authorised location. Observe local regulations.
