Document P/N: 2P136539
Release Date: 05/25/2017
Revision: F
26 of 42
Recommended Practice for Pump Packing:
In the oil field, it is paramount to have proper replacement packing sets readily available that are suited for your
specific application. At Weir Oil & Gas, we understand this, and have restructured our packing offering to better
meet your needs.
While still providing the wide range of quality product needed for the various shale play operating conditions, we
have simplified our packing selection so you can easily find what you need on the shelf when you need it.
Soft Sets vs Complete Sets:
Each packing offering can be ordered as either a soft set or complete set depending on your need.
Soft sets include:
Wiper
Ring
Peek Adapter Ring (if applicable)
Pressure
Ring(s)
Header
Ring
Complete sets include:
Applicable soft set parts, and
Lantern
Ring
Adapter
Spacer
SPM
®
Frac Pump Packing
For use in the following SPM
®
fluid ends in both legacy and SPM
®
Duralast
®
models: TWS 2250, TWS 2400,
TWS 2500,
QWS 2500
, QWS 2700, TEM 2500, and QEM 3000.
Frac Pump Low Pressure
-
This set includes a header ring and (2) pressure rings. It is recommended for
pressure pumping up to 10,000 psi and rated for up to 15,000 psi. For all higher pressure or non-standard
operations, please contact Weir Oil & Gas.
General Service
- Standard header and pressure rings for basic applications
Enhanced Service
- Pairs enhanced header rings with standard pressure rings for extended life
Extreme Service
- Enhanced header ring with extreme pressure rings for maximum performance
FRAC PUMP LOW PRESSURE
