Weinmann WM 24042, Description And Operating Instructions

Page: 40 / 80

40
Hygienic preparation EN
5. Rinse the creased tube thoroughly inside and out with clear warm water.
6.
Thoroughly shake out the tube system.
7. Hang up the tube system and allow it to drip dry, in order to prevent moisture entering
your therapy device.
8. Use the therapy device to dry the tube system completely. For details see the instructions
for use for your therapy device.
Disinfecting the housing
The housing, the connecting sockets and the connecting cable can be cleaned by simply
wiping them with disinfectant. We recommend TERRALIN.
Disinfect the tube system
As a disinfectant we recommend GIGASEPT FF. You are recommended to wear suitable
gloves (e.g. household or disposable gloves) during disinfection procedures. Observe the
instructions for the disinfectant used.
No disinfectant may penetrate the double tube.
To disinfect, proceed as follows:
Remove double tube:
1. Release both sleeves from the adapters.
2. Pull the double tube out of the creased tube.
3. Take the short piece of the double tube off the gray
adapter. Then take the tube out of the transparent
adapter.
4. Release the long part of the double tube from the
transparent adapter.
Disinfect double tube
1. Seal all four openings of the double tube using the
sealing plugs supplied.
2. Clean the double tube with a little disinfectant in hot
water so that there are no residues.
3. After disinfecting, rinse the double tube thoroughly
with distilled water.
4. Leave the parts to dry completely.
Double tube
Sleeve
Sleeve
Grey adapter
Transparent adapter