Weinmann WM 24042, Description And Operating Instructions

Page: 37 / 80

Setting up the device
37
EN
6. Insert the hose from your oxygen system onto the inlet
side of the valve (large scket on the right) 11 .
7. Assemble the exhalation system and the mask
according to the relevant instruction manuals.
8. Remove the seal from the port on the mask and attach
the O
2
supply hose there.
9. To humidify respiratory air, use the humidifier obtain-
able for your therapy device. Additional humification of
the oxygen with a bubble humidifier is allowed, but is
not necessary.
The use of an atomizer is not permitted.
A hose system with an internal O
2
supply hose is available
as an accessory.
You can use the hose system with the following devices:
CPAP devices
• SOMNO smart 2
• SOMNO set
nCPAP devices
• SOMNO comfort
• SOMNO soft +
BiLevel devices
• SOMNO vent S
• SOMNO vent ST
• SOMNO vent auto-S
• SOMNO vent auto-ST
CS devices
• SOMNO vent CR