Weinmann Homecare SOMNOclick, Description And Instructions For Use

Page: 24 / 64

24
English
Setting heating level
There follows a description of how to set the
heating level on your therapy unit.
On the SOMNO vent CR and SOMNO vent
auto-S/ST units, you can also call up the heat-
ing level via the Patient menu as an alterna-
tive. Follow the operating instructions for your
therapy unit.
1.
Switch on
the therapy device.
2. Hold down the humidifier button for
approx. 3 seconds until the number and
the humidifier symbol start to flash.
3. Release the humidifier button .
4. By pressing the humidifier button again
you can set the desired heating level
(1 - 6).
On the SOMNO vent CR and
SOMNO vent auto-S/ST units, set the de-
sired heating level using the Softstart but-
ton (+) and the humidifier button (-).
5. To save the setting, wait until the menu
exits automatically.
On the SOMNO vent CR and
SOMNO vent auto-S/ST units, you can
also press the On/Off switch to save the
settings and exit the menu.
Which setting is best for you depends on the
room temperature and the air humidity. This
means that the optimum setting changes ac-
cording to the season. Under "normal" condi-
tions heating level 3 is sufficient.
If your airways feel dry the next morning, the
heat output is too low. Please select a higher
setting.
If condensate forms in the creased hose dur-
ing a night of therapy, the heat output is too
high. Please select a lower setting.