WEILOR WIS 370, Instructions For Use Manual

Page: 57 / 68

57
EN
FUNCTION OF THE DEVICE
Timer
WARNING!
Other heating zones will continue to operate
if they have been previously enabled.
Setting the timer to switch off the
one required heating area
Setting a timer to turn more than
one cooking zone off
Using the Timer
You can use the timer in two different ways:
•
You can set it to turn one cooking zone
offafterthe set time is up;
•
You can set it to turn more than one cooking
zone off;
•
You can setthe timer up to 99 minutes.
1. Select the cooking zone by touching the
zone you want to set the timer, (for example,
25 minutes), when you select the cooking mode
(for example 3).
2. Set the time by slider
.
3. To touch the timer control , will show
default “30” and “0” flashing, you can slide the
slider from 0 to 5, then touch the timer control
again, “3” flashing, slide to “2”, to finish the
clock, after will show “25”.
When the time is set, it will begin to count
down immediately. The display will show the
remaining time and the timer indicator will flash
for 5 seconds.
If you use this function for more than one
heating zone, the timer indicator will show the
shortest time (for example, zone 1- Installation
time - 3 minutes, zone 2 - Installation time - 6
minutes, timer indicator will show “3”. )
If you want to check the set time for another
heating zone, press the button to select another
heating zone. The timer will show set time for
this zone.
When the cooking timer expires, the
corresponding heating zone will be switch off
automatically and show “H”.
4. If the setting time exceeds 99 minutes, the
timer will automatically return to 0 minute.
Note:
Set the timer using the sensor slider.
Note:
The red dot next to power level indicator will
illuminate indicating that zone is selected.
0 4 2 6 8 1 5 3 7 9