WEILOR WIS 370, Instructions For Use Manual

Page: 54 / 68

54
WARNING!
It must be ensured that only one sensor is
always pressed when switching on and off,
or when selecting the heating power level.
In case of simultaneous pressing of more
sensors, the system ignores control signals.
FUNCTION OF THE DEVICE
EN
Over-Temperature Protection
Indicator of residual heat
To lock the controls
To unlock the controls
Auto Shutdown
Residual Heat Warning
Locking the Controls
”H” will show which cooking zone is hot to
touch. It will disappear when the surface has
cooled down to a safe temperature. It can also
be used as an energy saving function if you
want to heat further pans, use the hotplate that
is still hot.
A temperature sensor equipped can monitor
the temperature inside the induction hob. When
an excessive temperature is monitored, the
ceramic hob will stop operation automatically.
Touch the key lock control . The timer
indicator wil I show ”Lo”.
1. Touch and hold the key lock control for
a while.
2. You can now start using your induction hob.
Another Safety feature of the hob is auto
shutdown. This occurs whenever you forget to
switch off cooking zone. The default shutdown
times are shown in the table below:
When the hob has been operating for some
time,there will be some residual heat.
•
You can lock the controls to prevent unintended
use (for example if children accidentally turning
the cooking zones on).
•
When the controls are locked, all the controls
except the ON/OFF control are disabled.
WARNING!
The letter ”Н” appears to warn you to keep
away from it.
WARNING!
When the hob is in the lock mode,all the
controls are disable except the ON/OFF,
you can always turn the induction hob off
with the ON/OFF control in an emergency,
but you shall unlockthe hob first in the next
operation.
Power level 1 2 3 4 5 6 7 8 9
Default working timer
(hour)
8 8 8 4 4 4 2 2 2