上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
- 104 - Specialized, Concentrated, Focused
Type
Warning Content
Cause
Solution
Related
errors of
state
The system is busy,
this operation can‘t
be executed.
Some illegal operations are
performed under machining
state.
Stop machining, and execute
some operations under idle
state.
Please
exit
from
simulation mode in
the
status
page
before changing the
state!
It is possible that some
illegal
operations
are
performed under simulation
mode, like modifying a
parameter or pressing some
shortcut keys.
Stop simulation and execute
some operations under idle
state.
Please switch to Auto
mode first.
Perform some operations
only available under Auto
mode
in
Manual
and
Reference Point modes, like
pressing ―Program Start‖
under Manual mode.
Switch to Auto mode and
then
perform
the
corresponding operation.
Breakpoint resuming
can‘t be executed
under current state.
―Breakpoint
Resuming‖
button is pressed in the
process of machining.
Breakpoint resuming can be
performed
to
continue
machining in case of power
failure, manually pressing
―Program Stop‖ button, and
E-stop in machining.
File
error
There
is
no
file
loaded in the current
parser.
Start file machining with no
file loaded in the system.
Load a machining file before
start machining.
Failed to read the
machining file, and
check if the path of
this file is changed.
The file loaded originally is
deleted.
It is necessary to re-load the
machining file.
