22/09/2021
WEIDOS Quick Start Guide
Version: 00.00.01
Page 4 / 52
Preface
Application Considerations and Warranty
Read and Understand this Manual
Please read and understand this manual before using these products. Please, also consult your comments or
questions before first use.
Application Consideration
THE PRODUCTS CONTAINED IN THIS DOCUMENT ARE NOT SAFETY RATED. THEY SHOULD NOT BE RELIED
UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR ENSURING SAFETY OF PERSONS, AS THEY ARE
NOT RATED OR DESIGNED FOR SUCH PURPOSES.
Please know and observe all prohibitions of use applicable to the products.
FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESSIGNED TO ADDRESS THE RISKS, NEVER USE THESE PRODUCTS.
NEVER USE THESE PRODUCTS BEFORE THEY ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
The manufacturer shall not be responsible for conformity with any codes, regulations or standards that apply
to the combination of products
in the customer’s application or use of the product.
The following are some examples of applications for which particular attention must be given. This is not
intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses
may be suitable for the products:
•
Systems, machines, and equipment that could present a risk to life or property.
•
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical
equipment, amusement machines, vehicles, safety equipment, and installation subject to separate
industry or government regulations.
•
Outdoor uses involving potential chemical contamination or electrical interference, or conditions or
uses not described in this document.
At the custom
er’s request,
the manufacturer will provide applicable third-party certification documents
identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient
for a complete determination of the suitability of the products in combination with the system, machine,
product, or other application or use.
