22/09/2021
WEIDOS Quick Start Guide
Version: 00.00.01
Page 30 / 52
Typical Connection as Digital Outputs:
3.11
Communications
In this section of the manual, the communications, and functionalities available on the default Weidos models
are individually listed.
UART
Weidos UART communication with Peripheral devices is possible through Serial connector pins 11 and 12.
The Serial Connector accepts two communication protocols (UART and RS485).
Please check the following table to select UART mode:
ATTENTION
Material damage!
Disconnect Weidos from Power Supply before any change on DIP switches configuration.
