22/09/2021
WEIDOS Quick Start Guide
Version: 00.00.01
Page 27 / 52
Typical wiring connection:
As already mentioned in Digital Outputs, Weidos GND pins can also be used for the common reference
GND:
See Analog Output examples of use in ArduinoIDE
File > Examples > Examples for WEIDOS-XXX > Analog.
Use Software Names defined in section 3.6 of this manual (Pinout description), to use Weidos pins.
ATTENTION
Material damage!
Output from Analogue Actuator must be connected to the common GND of Weidos Device. You can find several GND pins
in Weidos controller for this purpose.
