background image

7 Planning IO-Link device configurations

 | Editing IO-Link device configurations online

46

2547720000/03/09.2019

Manual Communication module UR20-4COM-IO-LINK

Activating an IO-Link port

You must be connected to the fieldbus coupler.

Activating an IO-Link port

 

In the 

device tree

, switch to the required IO-Link master.

 

For the IO-Link port that you want to activate, click 

Acti-

vate (play icon)

.

The “Operating mode” parameter of the IO-Link port con-

cerned is set to the value “IO-Link”. The supply voltage of the 

IO-Link port is switched on. The connected IO-Link device 

sends and receives process data.

Deactivating an IO-Link port

You must be connected to the fieldbus coupler.

Deactivating an IO-Link port

 

In the 

device tree

, switch to the required IO-Link master.

 

For the IO-Link port that you want to deactivate, click 

Deactivate (stop icon)

.

The “Operating mode” parameter of the IO-Link port con-

cerned is set to the value “Deactivated”. The supply voltage 

of the IO-Link port is switched off. 

Identifying a connected IO-Link device

The IO-Link port to which the IO-Link device is connected 

must be activated.

Identifying an IO-Link device

The configurator can determine the identification data of a 

connected IO-Link device. You can use the identification data 

to find the corresponding IODD or to check whether you 

have assigned the correct IO-Link device to the IO-Link port.

 

In the 

device tree

, switch to the required IO-Link master.

 

For the IO-Link port to which the IO-Link device is con-

nected, click 

Identify (magnifying class icon)

.

The Configurator calls up the identification data of the 

IO-Link device and illustrates it in the IO-Link port overview.

If you have already assigned an IO-Link device to this 

IO-Link port, the Configurator compares the identification 

data of the IODD with the identification data of the connect

-

ed IO-Link device. Matches are highlighted in green. Devia-

tions are highlighted in red.

Downloading IODDs for a connected IO-Link device

The connected IO-Link device must be identified by the IO-

Link Configurator. Your computer must be connected to the 

Internet.

Downloading IODDs

 

In the 

device tree

, switch to the required IO-Link master.

 

For the empty IO-Link port, click 

Download

 

IODD 

to 

which you want to add the IO-Link device.

The IODDfinder is opened in your standard browser.

 

Search for the required IODDs and load the files onto your 

computer.

Reading out IO-Link device parameters

The IO-Link device must be assigned to the IO-Link port. 

The connected IO-Link device must be identified by the 

IO-Link Configurator. The IODD must match the connected 

IO-Link device.

Depending on the number of parameters to be read and the 

capacity utilisation of the coupler, it may take a while until all 

data is read.

 

In the 

device tree

, switch to the required IO-Link master.

 

For the IO-Link device whose data you want to edit, click 

Edit (cog icon)

.

The 

detailed view

 of the IO-Link device is opened.

Updating the parameters

If you want to update an individual parameter:

 

Click the 

update icon

 next to the entry.

Summary of Contents for UR20 Series



























































Reviews: