Weidmuller SpeedMarking-Laser, User Manual

Page: 9 / 36

Printer installation
5658600000/00/05.07 9
2.2 Setting up the printer
•
Place the device onto a solid, flat surface.
•
Provide sufficient ventilation.
•
The ambient conditions should be stable, e.g. the temperature and humidity fluctuations should be limited
(Temperature: 20 °C – 35 °C; Humidity: 55% – 75%).
•
Avoid direct sunlight on the printer.
•
The environment of the printer should be free of any chemicals.
The following dimensions show the space required for setting up the printer.
Figure 4 Space in front of and behind the printer
Figure 5 Space on both sides of the printer
Make sure that there is enough space in order:
•
to open the upper cover
•
to load material into the entry
•
to empty the storage tray
•
to be able to access the on/off switch
•
to connect the mains and printer connection
•
to use the operating panel