19
45. Attach the Shroud (59) to the bracket on the Top
Frame (55) with two M6 Washers (78) and two
M6 x 16mm Bolts (18).
Attach the Shroud (59) to the bracket on the Base
(4) with two M6 Washers (78) and two M6 x
16mm Bolts (18).
46. Insert the M6 x 50mm Carriage Bolt (38) into the
centre hole in the Seat Plate (37). Attach the wide
end of the Seat (13) to the Seat Plate with two
M6 x 16mm Bolts (18).
Attach the Seat Plate (37) to the Seat Frame (36)
with the M6 x 50mm Carriage Bolt (38), an M6
Washer (78), and the M6 Nylon Locknut (2).
Attach the other end of the Seat (13) to the Seat
Frame (36) with an M6 x 50mm Screw (33) and
an M6 Washer (78).
47. Attach the Backrest (41) to the Front Upright (42)
with two M6 x 73mm Screws (43) and two M6
Washers (78).
45
46
47
18
55
18
59
78
78
4
18
78
18
78
13
36
37
78
2
38
78
33
18
43
43
42
41
78
78
Seat Assembly
10
13. Press two 38mm Square Inner Caps (32) into the
ends of the Leg Lever (29).
Lubricate an M10 x 63mm Bolt (107) with grease.
Attach the Leg Lever (29) to the Seat Frame (36)
with the Bolt and an M10 Nylon Locknut (21). Do
not overtighten the Locknut; the Leg Lever
must be able to pivot easily.
14. Press a 50mm Square Inner Cap (44) into the
end of the Left Butterfly Arm (47). Press a Sleeve
(105) into the round tube on the Left Butterfly
Arm.
Wet the lower end of the Left Butterfly Arm (47)
with soapy water. Slide a Large Foam Pad (45)
onto the Left Butterfly Arm.
Repeat this step with the Right Butterfly Arm
(not shown).
13
14
32
32
29
36
21
107
Lubricate
47
105
45
44
11. Press two 38mm Square Inner Caps (32) into the
end of the Seat Frame (36).
Attach the Bumper (87) to the Seat Frame (36)
with the M5 x 25mm Self-tapping Screw (80).
12. Attach the Seat Frame (36) to the Front Upright
(42) with the M10 x 80mm Carriage Bolt (99) and
the Seat Knob (49).
11
12
36
32
32
87
80
49
42
36
99
