24
40. Route the Low Cable (43) under a Pulley (69).
Attach the Pulley (69), a Cable Trap (71), and
two Half Guards (72) to the indicated bracket on
the Base (1) with an M10 x 50mm Button Bolt
(76) and an M10 Locknut (74).
Make sure that the Cable Trap (71) is oriented
to hold the Low Cable (43) in the groove of
the Pulley (69).
40
69
43
72
74
76
72
1
41. Route the Low Cable (43) over a Pulley (69).
Attach the Pulley (69) to the lowest hole in the
Pulley Plates (70) with an M10 x 43mm Bolt (65)
and an M10 Locknut (74).
41
74
70
65
69
43
42
42. Route the Low Cable (43) under a Pulley (69).
Attach the Pulley (69), a Cable Trap (71), and
two Half Guards (72) to the indicated bracket on
the Base (1) with an M10 x 50mm Button Bolt
(76) and an M10 Locknut (74).
Make sure that the Cable Trap (71) is oriented
to hold the Low Cable (43) in the groove of
the Pulley (69).
69
71
43
74
76
72
1
71
72
Summary of Contents for 831.14923.1
Page 40: ...40 NOTES...
