18
23.
See the CABLE DIAGRAM. Identify the Low
Cable (43).
Route either end of the Low Cable (43) through
the Leg Lever (13) and through the Leg (10).
Attach a Pulley (69) inside the Leg Lever (13)
above the Low Cable (43) with an M10 x 63mm
Bolt (89), two 12.7mm Spacers (73), and an M10
Locknut (74).
24. Pivot the Leg Lever (13) away from the Leg (10).
Attach a Pulley (69) inside the Leg (10) under
the Low Cable (43) with an M10 x 65mm Bolt
(75), two M10 Washers (88), two 12.7mm
Spacers (73), and an M10 Locknut (74).
23
24
13
13
74
73
69
69
10
10
43
73
89
74
73
73
75
88
88
25.
See drawing 25a.
Route the Low Cable (43)
under the Press Arm Spacer (42) as shown.
See drawing 25b.
Attach a Pulley (69) to the
indicated bracket on the Base (1) above the Low
Cable (43) with an M10 x 45mm Bolt (98) and an
M10 Jam Nut (99).
42
25a
43
1
69
98
99
25b
43
43
Summary of Contents for 831.14923.1
Page 40: ...40 NOTES...
