11
9. Insert the end of the Seat Bracket (8) into the
Frame (1), and then attach the Seat Frame (6)
to the Frame with an M10 x 70mm Bolt (14) and
an M10 Locknut (16). Do not overtighten the
Locknut; the Seat Frame must pivot freely.
Using an adjustable wrench, firmly tighten the
remaining Adjustment Knob (9) into the Frame
(1) and into one of the adjustment holes in the
Seat Bracket (8).
See the inset drawing. Insert an M6 x 13mm
Bolt (17) into the end of the Seat Bracket (8)
from the direction shown. Then, tighten an M6
Nut (25) onto the Bolt.
10. Make sure that all parts of the weight bench are properly tightened. Extra parts may be included. Place a
mat under the weight bench to protect the floor.
9
6
8
25
17
9
1
16
14
8
Summary of Contents for WEBE89617.0
Page 4: ...4 STANDARD SERVICE PLANS...
