16
27. Identify the Long Cable (68). Route the eyelet
end of the Cable through the Foot Plate (67) and
the Center Upright (45) and under a Pulley (87).
Attach the Pulley (87) inside the Center Upright
(45) with an M10 x 75mm Bolt (92), two M10
Washers (35), two 17mm Spacers (89), and an
M10 Nylon Locknut (34).
28. Wrap the Long Cable (68) over a Pulley (87).
Attach the Pulley and two Half Pulley Guards
(109) to the Double “U”-bracket (81) with an M10
x 48mm Bolt (33) and an M10 Nylon Locknut
(34).
29. Wrap the Long Cable (68) under a Pulley (87).
Attach the Pulley and two Half Pulley Guards
(109) to the Weight Carriage Base (41) with an
M10 x 48mm Bolt (33) and an M10 Nylon Locknut
(34).
27
28
67
68
45
34
35
35
87
89
34
109
109
81
87
33
29
68
34
26. Grease an M8 x 43mm Shoulder Bolt (107).
Attach the Butterfly Cable (31) to the Right
Butterfly Arm (56) with the Shoulder Bolt, an M10
Small Washer (95), and an M8 Nylon Locknut
(17).
26
107
17
95
31
56
Grease
92
89
109
109
87
41
33
