20
42. Attach the Curl Pad (9) to the Curl Post (8) with
two M6 x 16mm Screws (29).
42
9
8
29
43. Make sure that all parts are properly tightened
before the weight bench is used. The use of all
remaining parts will be explained in ADJUST-
MENT, beginning on the following page.
40. Grease an M10 x 68mm Bolt (98) with grease.
Attach the Leg Lever (5) to the Bench Leg (4)
with the Bolt and an M10 Nylon Locknut (34). Do
not overtighten the Nylon Locknut; the Leg
Lever must pivot easily.
41. Insert a Pad Tube (27) into the Bench Leg (4).
Slide two Foam Pads (26) onto the Pad Tube.
Assemble the two remaining Pad Tubes (27) to
the Leg Lever (5) in the same way.
40
41
5
5
27
4
27
27
26
26
34
4
98
