14
19. Wrap the Medium Cable (69) under a Pulley (87).
Attach the Pulley, a Small Cable Trap (88), and
two Half Pulley Guards (109) to the indicated
holes in the Pulley Plates (82) with an M10 x
48mm Bolt (33) and an M10 Nylon Locknut (34).
Make sure that the Cable Trap is oriented to
hold the Cable in the groove of the Pulley.
21. Attach the Medium Cable (69) to the M10 x
19mm Bolt (102) in the Weight Carriage (62) with
an M10 Nylon Locknut (34).
20. Route the Medium Cable (69) up through the
Weight Guide Top Frame (49), over a Pulley (87),
and back down through the Weight Guide Top
Frame. Make sure that the Cable is routed
between the Pulley and the welded rod as
shown. Attach the Pulley inside the Weight Guide
Top Frame with an M10 x 75mm Bolt (92), two
M10 Washers (35), two 17mm Spacers (89), and
an M10 Nylon Locknut (34).
18. Route the Medium Cable (69) over a Pulley (87)
and down through the Weight Guide Top Frame
(49). Make sure that the Cable is routed
between the Pulley and the welded rod as
shown. Attach the Pulley inside the Weight Guide
Top Frame with an M10 x 75mm Bolt (92), two
M10 Washers (35), two 17mm Spacers (89), and
an M10 Nylon Locknut (34).
69
89
89
49
35
35
92
18
34
87 Welded
Rod
82
19
20
21
34
88
69
89
89
49
35
35
34
62
69
102
92
34
87
Hole
69
109
109
87
33
Hole
Welded
Rod
