9
8
Risk due to incorrectly attaching the extension pieces
Hang the extension with one eyelet in the ceiling mount and the other in the
carabiner. The carabiner connects the extension piece to the swinging tire.
Do not in any case hang both eyelets in the ceiling mount or carabiner.
The rope can fray.
Risk from the wrong attachment material
Use only safety anchor hooks
or an eye bolt of at least 10 mm
material diameter in order to avoid an independent
unhooking and a material break.
Or use our T-profile rail system (item no. 146100)
for attaching.
Strength of the carrier material
Pay attention to an adequate load capacity of the material into which you
screw the screw hook or eyelet. The swinging tire can become detached from
the anchor during use.
Danger of a faulty strap and/or rope
Inspect the swinging rope before each use for damaged areas. Ropes, rings,
fabric, suspension, seams, and suspension devices should be checked for wear
marks and replaced if necessary. Ropes should be untwisted far enough so that
the interior is visible. If damage is visible, the swinging tire must immediately
be removed from use.
Risk due to an open screw carabiner
After you have hung the swinging tire, turn the screw of the carbiner tightly
again; the swinging tire can otherwise become detached from the mount.
Injuries can occur if these instructions are not followed!
Installation
Remove the packaging.
· Examine the item for visible damage and check that all parts are present.
· Check whether you might damage any power or gas lines or water pipes in
the installation area. The ceiling must be able to bear at least 5 times the
weight of the item (equivalent to around 20 kg).
· Attachment of the rope suspension may only be made in sufficiently solid
material such as concrete. Only use approved anchors or holding fixtures for
the ceiling system. By all means, consult a professional technician if necessary!
· For the ceiling mount, use a screw hook that is appropriate for your ceiling.
Maintenance:
i
Check the item before each use for damaged areas.
If damage is visible, the item must be immediately removed from use.
For this application, you will
need four additional ropes
(item no. 052450) and a screw
carabiner (item no. 644255).
All accessible metal parts must be
covered with a protective cover
(item no. 052453).
Please order separately.
The minimum distance to the floor must be 35 cm for both suspension
methods.
1-point suspension:
4-point suspension:
Components (for a 1-point suspension)
Number
Swinging tire
1
Rubber tire
1
Screw carabiner
1
Swivel
1
Protective cover
1
Support strap
1
Rope (adjustable from 72 to 115 cm)
1
