Programming
Table 5.6:
P0760 options
Option
Description
0 = Parameters
The settings for IP address, sub-net mask and gateway shall be done by means of
parameters P0761 to P0769.
1 = DHCP
Enables DHCP function. A DHCP server should set the IP address, sub-net mask and
gateway through network.
2 = DCP
The IP address and other network configurations are received via DCP (PROFINET IO).
X
NOTE!
For the changes in this parameter be effective, the equipment must be powered off and on again, or
an update must be performed by P0899.
X
NOTE!
For Modbus TCP and EtherNet/IP protocols, this parameter is only used if the addressing switches on
the product for IP address setting are set to 0.
P0761 – IP ADDRESS 1
P0762 – IP ADDRESS 2
P0763 – IP ADDRESS 3
P0764 – IP ADDRESS 4
Range:
0 ... 255
Default:
192.168.0.10
Properties:
RW, Sys
Description:
If P0760 = 0 (parameters), these parameters allow you to program the IP address of the Ethernet interface. For other
option of P0760, these parameters have no function.
Each parameter programs one octet of the IP address, where the P0761 is the most significant octet. The program-
med IP address, then, has the format “P0761.P0762.P0763.P0764”.
X
NOTE!
For the changes in this parameter be effective, the equipment must be powered off and on again, or
an update must be performed by P0899.
X
NOTE!
For Modbus TCP and EtherNet/IP protocols, this parameter is only used if the addressing switches on
the product for IP address setting are set to 0.
P0765 – SUBNET CIDR
Range:
1 ... 31
Default:
24
Properties:
RW, Sys
Description:
If P0760 = 0 (parameters), this parameters allow you to program the sub-net mask for the Ethernet interface. The
subnet mask can usually be programmed using a notation with 4 octets separated by dots, or CIDR notation, in
SRW01-ETH | 18
