WEG MMW03-M22CH, User Manual

Page: 35 / 44

www.weg.net
Energy Analyzer - MMW03-M22CH | 35
Adress Parametre Type Read / Write Write Condition
622 Neutral Current Alarm Delay Time 32 bit integer R / W
Enter the password in the “Settings
Protection” field if password protection is
enabled.
624 Cos
φ
Alarm High Limit float R / W
626 Cos
φ
Alarm Low Limit float R / W
628
Cos
φ
Alarm Hysteresis
float R / W
630 Cos
φ
Alarm Delay Time 32 bit integer R / W
632 Power Factor Alarm High Limit float R / W
634 Power Factor Alarm Low Limit float R / W
636 Power Factor Alarm Hysteresis float R / W
638 Power Factor Alarm Delay Time 32 bit integer R / W
640 Frequency Alarm High Limit float R / W
642 Frequency Alarm Low Limit float R / W
644 Frequency Alarm Hysteresis float R / W
646 Frequency Alarm Delay Time 32 bit integer R / W
Device Model
648 Device Firmware Version float RO
650 Device Model 32 bit integer RO
Password/Pin activation
652 Setting protection 32 bit integer R / W
Address for the device password. It displays
the enabled/disabled condition of the
password protection when reading using.
Reset Commands
1000 Reset Energy Values 32 bit integer WO
Enter the password in the “Settings
Protection” field if password protection is
enabled. Enter “1” into the respective address
to reset the values. Enter “0” before saving to
restore the values.
1002 Reset Counter Values 32 bit integer WO
1004 Reset Max. Values 32 bit integer WO
1006 Reset Min. Values 32 bit integer WO
1008 Reset Demand Values 32 bit integer WO
1010 Reset Settings 32 bit integer WO
1012 Reset Alarm Limits(MMW03-M22CH) 32 bit integer WO
1014 Reset the Device to Factory Settings 32 bit integer WO
Save The Changes
2000 Save Changes 32 bit integer WO
Enter the password in the "Settings
Protection" field if password protection is
enabled. Enter "1" to save the changes and
restart.
Manual Output Relay Control
4000
Enable Relay Control
32 bit integer WO
Enter the password in the "Settings
Protection" field if password protection is
enabled. Enter "1111" here to enable the relay
control. Enter "0" here to disable the relay
control.
4002
Relay 1 Control
32 bit integer WO
Enter the password in the "Settings
Protection" field if password protection is
enabled. Then, enter "1111" for the "Enable
Relay Control" address. Enter "1" to activate,
"0" to de-activate the relay.
4004
Relay 1 Control
32 bit integer WO
Enter the password in the "Settings
Protection" field if password protection is
enabled. Then, enter "1111" for the "Enable
Relay Control" address. Enter "1" to activate,
"0" to de-activate the relay.
Enable/Disable to Assigning Predefined Value for Energy Meters
5000 Enable Counter Change 32 bit integer WO
Enter the password in the "Settings
Protection" field if password protection
is enabled. Enter "2222" here to enable
assigning the relay control. Enter "0" here to
disable the meter assignment.
Tabela 4.1: Readable and Writable Data