26 | CFW501
HMI (Keypad) and Basic Programming
E
ng
lis
h
NOTE!
When the inverter is in the fault state, the main display indicates the
number of the fault in the format
Fxxxx
. The browsing is allowed after the
activation of the key ESC, and the indication
Fxxxx
goes to the secondary
display until the fault is reset.
NOTE!
When the inverter is in the alarm state, the main display indicates the
number of the alarm in the format
Axxxx
. The browsing is allowed after
the activation of any key, and the indication
Axxxx
goes to the secondary
display until the situation causing the alarm is solved.
NOTE!
A list of parameters is presented in the quick reference of the parameters.
For further information about each parameter, refer to the programming
manual of the CFW501.
