47
CHAPTER 5 - KEYPAD (HMI) OPERATION
5.2.4 Parameter Viewing and
Programming
Parameters and their contents are shown on the Display
through the LED´s " Parameter" and "Value". The identification
is made between parameter number and its value.
Example (P101):
Each parameter is associated with a numerical value
(parameter value), that corresponds to the selected option
among the available ones for this parameter.
The parameter values define the inverter programming or the
value of a variable (e.g.: current, frequency, voltage). For in-
verter programming you should change the parameter
content(s).
To allow the reprogramming of any parameter value (except
for P000 and P121) it is required to set P000 = 5.
Otherwise you can only read the parameter values, but not
reprogram them. For more details, see P000 description in
Chapter 6.
Parameter
Value
100 = Parameter Number
Parameter
Value
5.0 = Parameter Content
ACTION
HMI DISPLAY
DESCRIPTION
Turn ON the inverter
Use the keys and
Press the key
Use the keys and
Press the key
Inverter is ready to be started
Select the desired parameter
Numerical value associated with the
parameter
(4)
Set the new desired value
(1) (4)
(1) (2) (3)
