GALVANIC
Before treatment
Cautions
Contraindications
1.
The treatment area must be washed and dried
before any products can penetrate into the tissue.
2.
The polarity of the probes can be changed by
adjusting the “STATE” button between (+R) or (-G).
3.
Cover the roller/ball with a piece of cotton or a
sponge that has been dipped into a suitable lotion
(according to the treatment). The lotion can also be
applied directly to the skin.
Starting treatment
1.
Choose the desired galvanic probes (roller or ball).
Then properly connect two identical probes in the
wires.
2.
Select the desired polarity by pressing “STATE”, the
power output level must be at the minimum and select
the desired time of working by pressing “TIME”. You
can change any of these settings during the treatment.
3.
Press the “START/PAUSE” button.
•
Pacemaker (any electrical or rhythmic
heart-regulating device)
•
Pregnancy
•
Thrombosis/Phlebitis
•
Skin diseases
•
Operations (within the last 6 months)
•
Silicone implants
•
Hypersensitive or vascular skin
•
Always make sure customers remove any jewelry,
and confirm that they have not had any metal implants
(pins, joints, etc.) installed since their last treatment.
•
Pregnant women and people with sensitive, injured,
inflamed skin or blood capillary expansions should not
receive this treatment.
•
Customers with health issues such as heart disease
or infectious diseases and hyper-allergic or
hyper-sensitive skin (see contra-indications) may not
use this instrument.
•
Always make sure the skin surface has been
moistened with plenty of conductive product.
