11
6.
Install wedges through the top of the anchoring stand – to lock in the anchoring
crossbars and hammer into place.
CAUTION:
Before disassembling the anchoring system you must first remove the
wedges at the top of the anchoring stands, otherwise sill damage will occur.
7.
Insert the rail spacer wedges between the anchor stands and the floor rail – insert
by hand until snug and then tighten rail lock nuts firmly with 1
1
/
8
” (29 mm) wrench.
The car is now anchored and you are ready for pulling.
Anchoring
Crossbar
Rail
Lock
Nut
Rail Spacer Wedge
