MultiPort/LT User Reference
Page 69
MultiPort/LT Gateway Code Commands
Break Received 0 2
Buffer Overflow 0 0
MNP Bytes 16700 9968266
Good Frames 1023 151284
Non-data 3000 88557
Bad Frames 0 42
V42b Bytes 29612 12055694
SB Bytes 34033 13344415
Pkts 1012 102292
ARAP Bytes 21530 11515343
Pkts 333 90626
SB Time 0.44 140.35 sec
V42b Time 3.06 1928.19 sec
PortShare
Write 0 0
Read 0 0
ReadStatus 0 0
Status 0 0
Control 0 0
Others 0 0
Errors 0 0
Buffers: Rcv cnt: 30, 0, 0 Xmt cnt: 0, 0
A channel configured for serial operation that is currently supporting a Dial-
Out session will produce a printout like that shown below:
Chan B
Chan 1
PortShare Dial-Out User Michael Lawrence, Connected 01h36m50s out of Unlimited
Data+Status mode off, DTR Hold on close off
Port Speed 19200, Line Speed 19200, Parity off, Data bits 8, Stop bits 1
Flow Control: Tx CTS en:on, Xoff dis:on, RX DTR en:on, Xoff dis:on
Transmit Session Total
DDP Pkts 0 0
Bytes 0 0
ARAP Pkts 0 0
Bytes 0 0
SB Bytes 0 0
V42b Bytes 0 0
MNP Frames 0 0
ReXmit 0 0
Non-data 0 0
Ser Bytes 48487 48487
CTS Pause 0 0
CTS Jam 0 0
SB Time 0.00 0.00 sec
