![background image](http://html1.mh-extra.com/html/webster/multiport-lt/multiport-lt_users-reference-manual_949407103.webp)
MultiPort/LT User Reference
Page 91
MultiPort/LT Gateway Code Commands
ab0 Off Off
ab1 Off Off
ab2 Off Off
ab3 On Off
lc0 Off Off
et1 Off Off
et2 Off Off
3.3.4.15.
S - SNMP Table
The SNMP Table shows the number of variables and the configured contact,
name and location variables. The statistics relating to the number of SNMP
packets processed are also shown.
A typical printout is shown below:
SNMP
Number of SNMP variables 216
Size of one SNMP variable 40 bytes
Total size of SNMP table 8640 bytes
sysContact: Michael Lawrence
sysName: Agreeable
sysLocation: Janet Court Study
# Access Community name(s)
0 R (0x2) public
SNMP packets: 0 received, 0 sent
IN: 0 GetRequests, 0 GetNexts, 0 SetRequests, 0 errors
OUT: 0 Responses, 0 Traps sent, 0 errors
0 retrieved, 0 changed
3.3.5.
DECnet Related Commands
The following sections list the DECnet statistics and table printing commands in
the MultiPort/LT gateway code.
If you are using mgcmd to connect to the MultiPort/LT gateway code, please
note that mgcmd can only transmit one character at a time to the MultiPort/LT.
This means for two letter commands (such as those to obtain the DECnet
statistics), that the first character must be typed (followed by RETURN) then the
second character (followed by RETURN again).