MultiPort/LT User Reference
Page 51
Inside MultiPort/LT and Monitor Commands
Daughter board type 0x01 (appletalk) -- 4 channel
at0: net 95.10, node 194, Zone "webcomrad" (9)
IP addr 132.160.22.65, mask 255.255.255.224 (FFFFFFE0);
Base H# *1 (29)
at1: net 95.11, node 194, Zone "webcomrad" (9)
IP addr 132.160.22.97, mask 255.255.255.244 (FFFFFFE0);
Base H# 1 (29)
at2: net 95.12, node 194, Zone "webcomrad" (9)
IP addr 132.160.22.129, mask 255.255.255.244 (FFFFFFE0);
Base H# 1 (29)
at3: net 95.13, node 194, Zone "webcomrad" (9)
IP addr 132.160.22.161, mask 255.255.255.224 (FFFFFFE0);
Base H# 1 (29)
at4: net 95.6, node 16, Zone "webcomrad" (9)
IP addr 132.160.22.16, mask 255.255.255.0 (FFFFFF00)
at5: net 95.18, node 194, Zone unconfig'd
IP addr 132.160.22.193, mask 255.255.255.224 (FFFFFFE0)
Base H# 1 (29)
at6: net unconfig'd, node 0, Zone unconfig'd
*
The term '1 (29)' means BASEHOSTOFFSET = 1 and HOSTNUMBERS =
29.
To change daughterboard data:
Conf> daughterboard
Current config'd daughterboard type: 0x00: none
*
Installed daughterboard is type 0x01 (appletalk)
Enter Daughterboard type:
DB-Type> a
Changing daughterboard config from 0 x 00 (none) to appletalk
OK? y
Select an appletalk unit:
A-Unit> ?
