WebSTAR DPR300 Series Cable Modem Gateway User’s Guide
50
Configuring IP Address Filters
Use the Setup Advanced Settings – IP Filtering page to configure IP address
filters. These filters block a range of IP addresses from accessing the Internet.
If you are not familiar with the advanced settings detailed in this section,
contact your cable service provider before you attempt to change any of the
cable modem gateway default advanced IP filtering settings.
Click
IP Filtering
in the Advanced Settings section of the Setup page to access
the Setup Advanced Settings – IP Filtering page.
Setup Advanced Settings – IP Filtering Page Example
The following illustration is an example of the Setup Advanced Settings – IP
Filtering page.
Setup Advanced Settings – IP Filtering Page Description
Use this page to specify and enable a range of IP addresses to prevent access to
the Internet. Click
Apply
to apply and save your new IP address filter settings.
