How Do I Configure the Cable Modem Gateway?
37
How Do I Configure the Cable Modem Gateway?
To configure your cable modem gateway, you must access the WebWizard configuration pages. This section
provides detailed instructions and procedures for configuring your cable modem gateway to operate correctly and
presents an example of each WebWizard page. Use the WebWizard pages to customize your cable modem
gateway to your needs rather than using the default settings.
The WebWizard pages and the examples shown in this section are for illustration purposes only. Your pages will
differ from the pages shown here.
If you are not familiar with the network configuration procedures detailed in this section, contact your cable
service provider before you attempt to change any of the cable modem gateway default settings.
Configuring the Cable Modem Gateway
You must access the WebWizard in order to configure the cable modem gateway.
To gain access to the WebWizard, use the Web browser on the PC attached to
the cable modem. Type the following IP address and then select
Go
:
http://192.168.0.1
The Web browser accesses the WebWizard displaying the default About Your
Modem page. This page displays information about the cable modem gateway.
About Your Modem Page Example
The following illustration is an example of the About Your Modem page.
