WebSTAR DPR300 Series Cable Modem Gateway User’s Guide
44
Configuring the Default Settings
You can use the default settings, or, if your system requires different settings to
operate correctly, you can change the default settings using the Setup Basic
Settings – Network Configuration page.
If you are not familiar with the network configuration procedures detailed in
this section, contact your cable service provider before you attempt to change
any of the cable modem gateway default network configuration settings.
Click
Network Configuration
in the Basic Settings section of the Setup page to
access the Setup Basic Settings – Network Configuration page.
Setup Basic Settings – Network Configuration Page Example
The following illustration is an example of the Setup Basic Settings – Network
Configuration page.
