5.1 Select ‘Network Configuration’ in the menu and configure.
5.2 Select ‘Video Configuration’ in the menu.
4
.This button makes WebEye set broadcast
address automatically. It is possible to input
diretly.
1
. Click ‘Ethernet’
button.
2
. Check if IP address
is same as assigned at
Setup program.
3
. Set Netmask.
5
. Set gateway address. If an
unavailable address is assigned,
a popup message informs to
assign the address properly.
6
. Click ‘Apply’ button.
1
. Select ‘Enable’ to use video
channel.
2
. Skip this step for the built
in CCD. However by clicking
‘
B/W
’
, B/W images can be
viewed from the built in
CCD.
3
. Choose proper
type between
NTSC and PAL.
5
. Click ‘ Apply’ button.
