background image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*  IP Address and MAC Address * 

IP Address 

IP address is an identification code for computers and devices on a TCP/IP network. Networks using 

TCP/IP protocol route messages based on the IP address of the destination. Within a closed network, IP 

addresses can be assigned at random as long as each one is unique. However, connecting a private 

network to the Internet requires using registered IP addresses to avoid duplicates. IP address can be 

acquired from  a  network administrator or an I nternet service provider.

 

 

MAC Address (Medi a Access Control Address) 

MAC address is a hardware identification code that uniquely identifies each node of a network. The 

MAC layer interfaces directly with the network media. Consequently, each type of network media 

requires a different MAC layer. The  MAC address of WebEye is  a  12-digit number. A unique MAC 

address can be  found on the label at the bottom of each WebEye. 

1

. Select the default IP address of 

WebEye (211.53.133.91). 

2. & 6.

 The selected IP address 

appears (211.53.133.91). 

3

. Enter Admin’s 

password. Default 

password is ‘admin’. 

7

. Click ‘Start Configuration’ button, to 

access WebEye through Internet and 

configure administration conditions. 

5

. After changing IP address, the 

new IP addres s appears. Click on 

the IP address.

 

4

. Click this button to change IP 

address. Upon clicking the button, 

a new window appears where you 

change IP address. 

Summary of Contents for WebEye B101



















Reviews: