l
Please note!!
When an IP address is assigned to the WebEye, be careful not to assign the
WebEye with an IP address that is not compatible with the local network or
that is already in use by another computer or similar device. Please refer
below example and assign an IP address to WebEye.
Gateway address
192.168.1.1
Subnet mask
255.255.255.0
Broadcast address
192.168.1.255
Already used IP address
192.168.1.2 ~ 192.168.1.50
Available IP address for WebEye
192.168.1.51~ 192.168.1.254
However, if there is a subnet mask of 255.255.255.128, then IP addresses
from 192.168.1.129 to 192.168.1.255 are not in the same local network as the
IP address of 192.168.1.1 to 192.168.1.128.
5. Configure administrator’s condition
.
l
By clicking ‘ Start Configuration ’ button on setup program, you may access
WebEye administration page through Internet.
