1.4 Internet Browser Requirements
l
Internet Explorer 5.0 and above
l
Netscape Navigator 4.7 and above
1.5 Check LAN
l
The WebEye should be connected to a
10 Base-T LAN
. 10 Base-T LAN is standard for
network configuration.
l
In the rare instance of 100 Base-T LAN, a 10/100 switching hub will be needed to
convert 100 Base T to 10 Base T.
2. Connecting Ethernet and Power Cables to WebEye.
2.1 Connect network and power to WebEye
l
Make sure that indicator lights and dipswitches are as follows:
5
. Go to ‘Gateway’.
6
. Check gateway address.
8
. Check IP
address and subnet
mask.
7
. Go to ‘IP Address’
1. Connect Dome camera
to input channel
2. Check the left DIP switch up
that indicates video terminated
resistor.
