Weber Geset 117, Original User Manual

Page: 26 / 59

Chapter 5 Transport
40002674 BTA Geset 117
Version: 15.01.14
page 26 of 59
GB
The transport will be arranged by a Technician of the Bluhm Weber Group or by
authorized specialists.
Remove the packaging material and the transport securing
devices only at the site of use, and transport the labeling system in
its original packaging to the labeling site. If the labeling system is
not secured, it can tip over easily when transported.
Requirements
The labeling system is packed when delivered (with possible exceptions), that is:

It is standing on a pallet

It may be wrapped with stretch film or in a transport box

It may be secured with additional straps and the plate feet may be screwed to the
pallet

Access ways to the machine are sufficiently dimensioned and not blocked.
Required equipment

Suitable means transport (double pallet trucks or forklifts) with a sufficient lifting
force (weight s. chapter “Specifications”). When using a forklift, drive slowly.

Use a steel strapping cutter to remove the straps

A crescent wrench for the transport securing devices.
Fig. 5-1: Examples of packaging
No. Description
1
TRANSPORT BOX
2 STRAP
3
TRANSPORT SECURING SCREW
4 RUBBER FEET