Chapter 2
Safety regulations
40002674 BTA Geset 117
Version: 15.01.14
page 21 of 59
GB
*²
Safety switch
Fig. 2-4: Safety switch
Safety switches are mounted on the protective housing and
protection doors to be opened. They serve for the immediate
stopping of the labeling system in case of accidentally opening
of the protective housing and protection doors. Switching on the
labeling system with open housing or door is not possible.
*²Only if system has the appropriate features.
Working places for the operator personnel
The labeling station is an automated system and does not require operation while
labeling.
When the labeling system is operating without any malfunction, the operator may
only be in the safe area, that is, the area covered by the protective measures.
For servicing, repairing and troubleshooting (remove the label from the applicator), etc.,
the labeling system can be operated from all sides.
Only one person is permitted to replace the consumable material. All interventions are
only permitted when the labeling system has stopped operation.
After troubleshooting and/or restarting the labeling station, the operator must
immediately leave the hazardous area and has to stay in the area designated by the
safety measures.
Waste disposal
This label is in compliance with RoHS 2 EU Directive 2011/65/EG given
observance of the prohibitions on use are and avoidance of pollutants.
Summary of Contents for Geset 117
Page 2: ...Blank Page ...
