Chapter 7
Adjustment and initial operation
40002674 BTA Geset 117
Version: 15.01.14
page 37 of 59
GB
Adjust side guidance
The side guidances are used to determine the place at the conveyor where the product to
be labeled should be transported to. For side labeling, the adjustment is generally
centered to the base conveyor.
Information on adjustment of side guidance
The side guidances are adjusted by the star grips. The guidances have to be adjusted that
between product and side guiding is a crack of appr. 1-1,5 mm per side.
Fig. 7-2: Side guidance
No.
Description
1
STAR GRIP SIDE GUIDANCE
2
SIDE GUIDANCE WITH WEAR STRIP
3
DISTANCE = P 2-3 mm
Requirements
¥
Labeling system is turned off.
¥
2 sample products.
¥
No transportation of products.
Instruction
Please adjust the side guidance as follows.
Step
Procedure
1
Loosen the star grips.
2
Open the side guidances and place one sample product at beginning and
end.
3
Adjust the side guidance to the required criteria (s. section above). Observe
a distance of 1 - 1,5 mm to the product. (In infeed passage this distance can
be adjusted larger.)
4
Tighten the star grips.
5
Check the adjustment by moving a sample product through the side
guidances. The sample product has to slide easily through the guidance at
each passage.
Summary of Contents for Geset 117
Page 2: ...Blank Page ...
