Weber Geset 111, Original User Manual

Page: 6 / 56

Chapter 1 General information
40001684 BTA Geset 111
Version: 12.05.14
Page 6 of 56
GB
Purpose and overview of the operating instructions
These operating instructions will help you get to know the system Geset 111 and use it
properly.
They contain important instructions for the user on how to use the system safely and
correctly. Its consideration helps to:

Avoid hazards,

Minimize repair costs and outages and

Increase the reliability and service life of the machine.
The operating instructions are for the system identified in the title with the stated type
number.
The operating instructions must always be available wherever the system is used. They
must be read and used by everyone assigned to work with the system.
Printing mistakes, errors, and changes to maintain the state-of-the-art may occur.
Illustrations without protection devices may be presented for the sake of illustration.
How to use the operating instructions
Detailed explanations are offered below of the conventions for the text and illustrations
which are used in this manual.

Buttons, switches and pushbuttons that need to be pressed are placed in brackets.
Ex.: Press the [Start] button to accept the changes...

Menu points and links to chapters and keywords are placed in “…“
Ex.: The pushbutton “Turning plate infeed/outfeed passage“…

Procedures that need to be performed in a fixed sequence have to be numbered.
Step Procedure
1 Pull the power plug ...

Special information is in bold and/or has a gray background
This is an example of special information!

All figures (Fig.) are numbered sequentially for each chapter. This means that the
reference "Fig. 2-1" corresponds to the first figure in chapter 2.
¥
Illustrations are frequently shown with only the essential information and may
therefore deviate from the original. Illustrations are therefore shown without covers or
protection device for the sake of clarity.
¥
Illustrations limit itself partly to the depiction of one variant (e. g. only RH, only LH, or
only [System1]…). It is particularly valid for example figures if the information content
is transferred logically to other system versions.