Safety
SONIC DIGITAL HS MD/MFD
8
2.2
Operating conditions
All ultrasonic welding units are designed for indoor use in a closed and dry hall.
2.3
Safety concept of the manufacturer
The unit has been designed and built based on a risk analysis and in accordance
with applicable harmonised EU directives, standards and further technical specifica-
tions. The unit is state of the art and offers the highest level of safety and reliable
operation.
NOTE
§
Observe the warnings attached to the ultrasonic generator!
Prior to assembly/disassembly of the ultrasonic generator or changing
a fuse, de-energise or disconnect the ultrasonic generator and switch
off the ultrasonic supply.
2.3.1
Conversions or modifications
NOTE
§
Any modifications of the generator are prohibited!
The mechanical and electrical behaviour of the generator can be im-
paired by additions or modifications of any type.
No modifications or additions to the mechanical, electrical/electronic
components, safety components and changes to the programming
are permitted without the express written permission of the manufac-
turer.
