Webb WEWBVAC, Instruction Manual

Page: 16 / 44

16
PRE-OPERATION
FUEL & OIL
WARNING
YOUR MACHINE IS SUPPLIED WITHOUT ENGINE OIL OR UNLEADED PETROL
Operating the engine with insufficient oil can have catastrophic consequences. Any failure caused by
insufficient oil, will not be covered by the manufacturer’s warranty.
Read instructions carefully.
Fuel & its vapors are very flammable. Do not use or fuel the machine near a flame, sparks or while smoking.
Allow the engine to cool for more than 3 minutes, before re-fueling. Never fuel the machine with the engine
running. Fuel the engine at least 15 metres away from your work area. Always fuel your machine outdoors.
IMPORTANT:
Fuel which is older than 30 days old can become stale and cause acid & gum deposits in the fuel system or
essential carburettor components. This could result in starting issues which would not be covered by the
manufacturer’s warranty.
Ensure that any stored petrol is clearly marked in a separate appropriate canister for a maximum of 30 days
if not mixed with a fuel additive. If the machine is not going to be used for a long period, drain the petrol
from the fuel tank, start the engine and drain the carburetor of any remaining fuel.
To keep fuel fresh, refer to instructions from the engine manual supplied with this machine. A fuel additive
which you add to your fuel, can help make your machine easier to start, extend the shelf life of your fuel for up
to two years, keeping the carburettor & engine clean, plus reducing emissions and increasing fuel economy.
ADD FUEL & OIL
IMPORTANT:
Oil and fuel specifications and levels are referred to in the Briggs & Stratton engine manual supplied with
this machine. Do not attempt to use the machine if you are missing the Briggs & Stratton engine manual,
please contact us.
INSTRUCTION MANUAL