Webb WEWBVAC, Instruction Manual

Page: 15 / 44

15
HOSE & BAFFLE PLATE
1. Open the front hose cover.
2. Align the end of the hose connector with the front hose inlet.
3. Insert the hose connector.
4. Rotate the hose connector clockwise to lock.
5. Insert the suction inlet baffle to block the inlet and provide full suction power to the hose.
GUIDE WHEELS
The guide wheels are fitted to the front corners of the suction housing. Fit in the following order:
ACCESSORIES
BRUSH OR SCARIFIER - MINIMUM TWO ADULT ACTION
The equipment can be assembled with the Dethatching (blades) or Scarifying (Spring Tines) cylinders. Only
replace the cylinder with an original Webb product, to ensure top performance & safety. To change the
cylinder, proceed as follows. We recommend this is undertaken by a minimum of two adults and that suitable
hard-wearing gloves are worn at all times.
WARNING
When changing the cassette, ensure suitable hard-wearing gloves are worn at all times
CAUTION
Only use genuine cassettes with this machine.
1. Tip the machine backwards.
2. Pull the quick release trigger and open the quick release cover.
3. Align the square end of the accessory cassette into the square housing of the machine.
4. Insert the bearing end of the accessory cassette into the quick release bracket bearing mounting position.
5. Pull the quick release trigger and fasten the upper cover.
WARNING
Before Installing, it is necessary to turn the engine off.
The quick release cover must be snapped into place. Pull the roller firmly without pulling the trigger. Please
check if the cassette will fall out.
INSTRUCTION MANUAL