Webb WEWBVAC, Instruction Manual

Page: 23 / 44

23
3. Make sure the rocker arm microswitch is in the closed position. This is located at the rear, towards the
bottom of the machine.
4. Open the rear hose cover.
5. Align the end of the hose connector with the rear hose inlet.
6. Insert the hose connector.
7. Rotate the hose connector clockwise, to lock.
NOTE: Please understand the parameters of the hose before use.
NOTE: When working, try to straighten the hose and work it to ensure maximum suction and wind speed.
NOTE: It is strictly forbidden to point the hose to others or any non-working area during work.
NOTE: It is strictly forbidden to load and unload the hose interface when the engine is running and
machine started.
NOTE: Do not pull the hose to move the machine forward or backward.
NOTE: Do not align the hose head with liquids, fire, and hazardous gases.
NOTE: Do not pick up the debris which is larger than the hose opening.
NOTE: When the hose is blocked, stop the machine and clear the obstruction.
NOTE: Keep the hose away from the engine and muffler.
HOSE TELESCOPIC HANDLE
1. Telescopic handle of the hose can be adjusted for different handle heights.
2. Push the lock pin in with your thumb, adjusting the height of the handle, up or down to the required
height.
HOSE BLOWER
The accessory hose can be fitted to the machine, to enable leaves and debris to be blown to a safe vacuum
area.
1. Separate the collection bag from the rear baffle.
2. Ensure the rear baffle is in the closed position.
INSTRUCTION MANUAL