59 |
P a g e
FRENCH DOOR SHUTTERS WITH NO CUT-OUTS
2
SIDED FRAME (TOP & BOTTOM)
1
FRAME ASSEMBLY
•
No frame assembly required.
2
FRAME & CATCH RECEIVER INSTALLATION
•
Partially set an installation screw into the bottom frame.
•
Set the bottom frame on the door below the glass to determine proper position
of the frame and mark the position with a pencil.
•
Make sure the bottom frame is level and positioned left and right so the panel will
not interfere with the door knob.
•
Attach the bottom frame.
•
Carefully set the panel on the bottom frame and locate the position of the top
frame. Then mark this location and remove panel.
•
Begin attaching the top frame making sure it is level and aligned properly with
the bottom frame.
•
Install button plugs once all screws have been set.
•
Install each receiver 22mm from the edge of each frame
•
Insert catch into the receiver so the screw is sticking out into the room
•
Carefully place the panel into position
•
Press the panel against the screws to indent the panel
•
Remove the panel
•
Remove catches from the receivers
•
Screw the catches into the indent on the panel
•
Place the panel into position, lining up catch and receiver
•
Tap panel front until catch goes into receiver at each corner
Summary of Contents for Eclipse Shutters
