Weather-Rite TT Series, Installation, Operation & Service Manual

Page: 128 / 205

TT-S
ERIES
I
NSTALLATION
, O
PERATION AND
S
ERVICE
M
ANUAL
122 of 198
SECTION 24: START-UP PROCEDURES
Electrical Shock Hazard
Disconnect electric before service.
More than one disconnect switch may be
required to disconnect electric from
equipment.
Equipment must be properly grounded.
Severe Injury Hazard
Do not enter equipment while in operation.
Equipment may start automatically.
Do not operate with door open.
Installation, operation and service must be
done by a trained technician only.
DANGER
Failure to follow these instructions can result in death, electrical shock or injury.
Explosion Hazard
Leak test all compo-
nents of equipment
gas piping before
operation.
Gas can leak if
piping is not
installed properly.
Do not high pressure
test gas piping with
equipment
connected.
Carbon Monoxide
Hazard
Do not recirculate air
from the heated
space over burner.
Air supply to burner
must be from outside.
Falling Hazard
Use proper safety
equipment and
practices to avoid
falling.
Do not use any part
of equipment as
support.
Burn Hazard
Allow equipment to
cool before service.
Internal components
of equipment may
still be hot after
operation.
WARNING
Failure to follow these instructions can result in death, injury or property damage.