We Care Solar | Jan 2019
Solar Panel Installation
15
This will make it easier to run the homerun cable through the roof and walls
Negative
wire black
Positive
wire red
1+
1-
How to Remove and Reassemble the Homerun Cable Connector
1
3
5
6
2
4
Twist blue shroud to disassemble
Leave screws attached to the connector
Twist the blue shroud firmly to
complete assembly
To rewire the connector, tighten screws firmly
onto wire. When finished, you should not be
able to pull the wires from the connector.
Loosen the terminals
To run the homerun cable through the
roof and walls, tape each wire individually
and then tape the two wires together
Insert
black negative
wire into
1-
Insert
red positive
wire into
1+
