We Care Solar | Jan 2019
To reconnect the cable to the light expansion box follow these steps:
Insert the wires through the cord locking nut and
back into the light expansion box and remove the
tape from the end of the wires
10
Lights Installation
32
Ensure wire ends are straight and not frayed
!
Gently push the wire ends back into the terminal.
Match red to red and white to white. Ensure the
wire ends are inserted completely and no bare
metal is exposed. Pull on the wires to ensure they
are firmly attached to the terminals.
Tuck the wires into the space next
to the circuit board
Tighten the cord locking nut
Replace the light expansion box cover and
tighten the 4 screws
How to Install the Light Expansion Box
